AngCobra's

Edge Weapons 

Page

Hi there, Thanks for visiting my Edge weapons page. This page will contain images and information about different kinds of Edged Weaponry, such as Swords and Knives that caught my interest. I hope that you'll enjoy this page and find it informative.

Depending on your connection speed, it may take you a while to fully load this page the first time, please be patient, I f it gets any bigger I may eventually split it up into different pages, for now, I'm keeping it all in one page. 

If you see a broken link or wish to share your comment with me, please feel free to email me at:

Please remember to state what page and specific links are broken since I have a lot of webpage and not enough time to look through each links. 

Thanks and Enjoy!

^_^

AngCobra

AngCobra's Main Page -  Contains links to all of my webpages, Anime, Fanfics, etc.

Weapons Webpage -  Contains pictures and information about misc. weapons, replaces my Firearms webpage

Pistols Webpage -  Contains pictures and information about Pistols.

Rifles Webpage -  Contains pictures and information about Rifles.

Edge Weapons Webpage -  Contains pictures and information about Knives and Swords.

Impact Weapons Webpage -  Contains pictures and information about Batons and Staff.

Weapons Links Webpage -  Contains weapon related links

Firearms Webpage -  Contains Links to all of my new pages, will no longer be updated.

Swords

Above Images from Left to Right

- United Cutlery (UC1184) Voyager Full Tang Ninja Sword - constructed of one-piece of Tempered 420 Stainless Steel with a Black Non-Glare Finish and  a cord wrapped grip. It comes with a scabbard constructed of Fiber-Reinforced Nylon with lashing Grommels and features fully adjustable  nylon shoulder and leg straps. overall length is 26 7/8" with a Blade length of 17 1/2" with a sword thickness of 3/16. Made in Taiwan This is a pretty cool Sword. It Doesn't have a full guard so that it's pretty much flat and can be easily be concealed, The cord wrapping was kind of thin and slippery so a heat-shrinking rubber tube was put on the handle and heat was applied to shrink the tube to fit the handle and it helped with the handling characteristic of the sword

- United Cutlery Voyager Full Tang Ninja Sword in sheath

- Bud K (BK 235) Full Tang Ninja Sword - Overall length is   30" with a blade length of 17 3/4" with a sword thickness of 1/4", it has a Black cord-wrapped handle and comes with a cord wrapped Hardwood Scabbard with straps that allows the user to wear the scabbard in the middle of your back. Made in Pakistan

- Bud K (BK 235) Full Tang Ninja Sword in sheath

- United Cutlery (UC 702) Ninja Warrior Sword - Constructed of 420 Stainless Steel, with a black non-glare finish, The handle is wrapped in black braided cord with decorated cast metal collar and pommel with a copper finish., this is a nice example of a nice Functional Ninja Sword (at least what most people think a ninja sword should be ^_^), it contains a lot of extra weapons like two throwing stars which detach from the hand guard (it detaches a little too easily), the Black aluminum scabbard tip removes to reveal a hidden battle tool (like a kubutan) and a throwing knife that can be attached to the tip of the scabbard to make the scabbard into a spear, 2 mini 8 1/2" Tantos are located on the lip of the scabbard, a 9 piece set. Overall Length is 33 1/2" with a blade length of 23"and a blade thickness of 3/16" 

Above Images from Left to Right

- United Cutlery Dragon Katana - overall length is 42" with a blade length of 29 1/2", the blade is made of 440 Stainless Steel, it comes with a black lacquered scabbard

- United Cutlery Dragon Katana (D41) in it's sheath.-

- Chinese Military Cavalry Sword - Imported by Cold Steel (Discontinued) The overall Length is 37" (38" with scabbard) with a Blade length of 30", width of 1 3/16" and blade thickness of 1/4", the blade is chrome plated, the scabbard is painted green with a brown leather band  

- United cutlery Cobra Sword Cane - Overall Cane Length is 35" It has with a Blade Length of 21" with an Sharp Edge Length of 19.5" and a Thickness of 3/16".  The Cane weighs 2 lbs, most of the weight is on the remarkably detailed head, The blade is made from 420 Stainless Steel, it comes with a black lacquered aluminum shaft with a rubber tip. You don't have to use the sword, you can use the Cobra head to knock someone senseless. ^_^

- Close up picture of the head of the Cobra Sword Cane.

- United Cutlery Mega Night Watchman - 2 piece set that can be configured into three weapons, Baton, Short Sword and Spear. In Baton Mode, it's length is 22.5" with a thickness of 1 1/16", in Short Sword Mode it's Overall Length is 18", it has a 12" blade, with an Sharp Edge length of 11" and a Blade Thickness of 2/16. In spear mode, it's Overall Length is 34.5". The only thing about this weapon that kind of bugs me is that in Baton Mode, if you strike something with it, you'll hear/feel the blade inside strike the inside of the sheath.

- United Cutlery Mega Night Watchman - shown here in Spear mode.

Fixed Blades

Above Images from Left to Right

- HK Bayonet shown with the bayonet adaptor for the HK91 or HK93

- HK Bayonet in sheath

- U.S. M9 Bayonet

- M16 - Chinese Military contractor made copy of the US M9 Bayonet, it features the same features of the M9 bayonet, the scabbard has a built in sharpening stone on the back, the spine of the blade has a serration for sawing thru things.  the tip of the scabbard turns into a wire cutter when it combined with the knife, it also has a removable pistol magazine pouch which is secured to the sheath by velcro, it's pretty well made copy for a price that's cheaper than the original M9 bayonet

- M16 - Chinese Military contractor made copy of the US M9 Bayonet shown in it's sheath

- M16 in it's sheath

- Glock fighting knifes - it features a serrated spine on it black blade, The handle and sheath are made from the same material as the plastic used in making the frame of the Glock pistols 

- Clock Fighting knife in it's sheath

Above Images from Left to Right

- Cold Steel Recon Tanto - Features a rubber handle for ease of handling, the blade is made from high carbon steel, the razor sharp blade is finished in black to help prevent rust,  it comes with cordura sheath 

- Cold Steel Recon Tanto in it's sheath

-Ontario Tanto knife - features a plastic handle, the blade is made from high carbon steel, the blade is finished in black, it comes with a cordura/leather sheath 

-Ontario Tanto Knife in sheath

-Tanto knife with large serrated back - The surgical steel blade is shaped like a standard Tanto blade but what's different about it is that instead of having a blunt spine, the spine has a false edge (not sharpened) with large sharp serrations along most of it's back, with a cast metal handle, it also comes with a leather sheath.

Above Images from Left to Right

- United Cutlery Sentry Knife (UC784ST) - The Tanto blade is made of 420 J2 Stainless Steel with partial serration Blade , and it has a Cast Metal Handle with a special Knuckle Guard Design, it comes with a Black nylon sheath with a fully adjustable nylon shoulder harness, belt loop and boot clip with a quick release that's reversible 

- United Cutlery Sentry Knife (UC784ST) - shown in it's sheath-

- United Cutlery Bushmaster Survival Knife (UC212) - Features a 9" 420J2 Stainless Steel Blade and Black Cast Metal handle with detachable Handguard with a survival kit stored in the handle and compass, the sheath also holds a small flashlight, snakebite kit, can opener and trap

- United Cutlery Bushmaster Survival Knife (UC212) shown in it's sheath.

Above Images from Left to Right

- Bat Wing Knife - Features Stainless Steel Black, Finger Grooved Bone Handle and Comes with a special Black Leather Sheath

- Sarco Finger Fighter knife - Made of a one piece Stainless Steel with partial serration, it comes with a leather sheath, this is an interesting knife, though the finish was kind of rough, but after a little filing with a steel file to smoothen out the rough edges, it became more 'finger' friendly 

- Cold Steel Push knife - it features a 1" blade with a rubber handle it comes with a plastic sheath that has a clip that can be attached to a keyring or belt loop

- Cold Steel Push knife - Shown in it's plastic sheath

- Swedish Utility knife, featured a chrome plated carbon steel blade and a green plastic handle and molded sheath

- Swedish Utility knife in it's sheath

Balisong Knives

Above Images from Left to Right

- Bear MGC Damascus 'Armor Piercer Balisong Knife (BR114AD) - Sizes are 8 7/8" open and 5 9/8" closed. features a 3" Tanto 'Armor piercing Damascus Blade and a Black Speckled Metal Handle with slots cut into the handle.

- Balisong Knife with Stainless steel Knife and cast metal handle, it came with a unique keyring locking latch that's not functional, it's hard to unlock  

- Balisong Knife with Stainless steel Knife and cast metal handle with curvy edge, it came with a unique keyring locking latch that's not functional, it's hard to unlock  

- Valor Balisong Knife with 440 Stainless Steel Knife and slim cast metal handle, the slim handle makes it easy to conceal but care must be taken in positioning the fingers when you're opening/closing it to prevent your fingers from being pinched by the handles.

- Balisong Knife with Stainless steel Knife and thin metal handle with the designs of the playing card (spade, heart, clover and diamond) cut into the handle, the thin handle makes it easy to conceal, unfortunately the blade is also thin which makes it also easy to bend.

- Balisong Knife with Stainless steel Knife and black metal handle  

Balisong Links

- Balisong Knife Collector.com

- Balisong Times.com

- Balisong Video Archive - Movie Clips of Balisongs being flipped.

- Balisong Xtreme.com

- BenchMade Knives - Makers of Fine Balisongs

- BladeForums.com - Forum where Knives are discussed

- Club Balisong.net

- Cutlery Shoppe - Sells Knives

- Microtech Tachyon - Sells Knives

- New Graham Knives - Sells Knives

- Pioneer Valley Knives - Sells Knives

- Primer on Sharpening a Knife

- VideoKnife.com

Folder Knives

Above Images from Left to Right

- Benchmade Eclipse (BM840) features a 4" Stainless Steel Blade with Partial Serration and comes with a Thumbhole for ease of opening, actually you don't really need the thumbhole to open the blade, if you keep it well-oiled, you can open the blade by simply flicking your wrist. it's a lock back, the handle is made from plastic with a reversible black metal belt clip , The handle is shaped well for handling, the spine of the blade has dull serration near the handle which you can put your thumb for better control. the Eclipse is also available with a 3" blade (BM830),  2 1/2" blade (BM820) and also comes with a black finished blade, the black finish wears off with use causing the blade to have an uneven finish

- United Cutlery Colt Pont - Features a 2 7/16" 420 Stainless Steel Blade (razor sharp) with Thumb Stud and Fiber reinforced nylon handle with rubber insert and a stainless steel Belt clip and liner lock.

- Frost Cutlery Paratrooper Liner lock  (FRC282S) it's 4 1/2" Closed

- Frost Cutlery Paratrooper Liner lock  (FRC282S) shown with it's blade closed with belt clip

- A Liner Lock knife, stainless steel blade with a serrated edge and a thumb stud for opening, the handle has a rubber cover, what's different about this is the way that you can unlock the liner lock to close the blade, normally with a liner lock, you use your thumb to disengage the lock by pushing the edge of the lock down, with this knife, there is a hole cut in the handle through which you push with your thumb against the lock, minimizing your risk of getting cut with the blade while closing blade. it comes with a nylon web pouch, it's also available with a straight edge blade

- A Liner Lock knife - shown with the blade closed

Above Images from Left to Right

- United Cutlery Knife - Tanto shaped blade with partial serration, it has a cast metal handle with rubber insert and stainless steel belt clip

- United Cutlery Knife - Shown with Blade Closed 

- Commemorative lock back knife - Standard Lock Back knife design with Gold Eagle Design on the Handle

- Commemorative lock back knife with Blade closed

- United Cutlery Shotgun Shell Knife (UC181B) - 1 1/2" stainless Steel Blade concealed in a Shotgun Shell Case

- United Cutlery Shotgun Shell Knife (UC181B) - Shown with blade folded.

- Novelty Knife - With outline of a Nude female on the Brass Handle

- Novelty Knife - Shown with the Blade Closed

Above Images from Left to Right

- Automatic knife - Model name is Nato - you slide a button to open and retract the blade, spring powered 

- Automatic knife - with Blade closed

Above Images from Left to Right

- United Cutlery Self Defense Security Comb (UC720) - Comb made of Black Zytel, Pull the Handle and a black Zytel Knife is shown Overall length is 8 1/4".

- United Cutlery Self Defense Security Comb (UC720)  shown with the knife extracted

- United Cutlery Stealth Hairbrush Dagger (UC732) - Brush made of Black Dupont Rynite SS35, Overall length is 8 1/4".

- United Cutlery Stealth Hairbrush Dagger (UC732) - Shown with the Dagger extracted.

- Self Defense Security Comb - Comb made of Black plastic, Pull the Handle and a 4" double edge Stainless Steel blade Overall length is 8 1/4".

- Self Defense Security Comb - Shown with the Dagger extracted

Above Images from Left to Right

- CIA letter opener - the original plastic knife that started the trend of using plastic knives as a defensive tool.

- Plastic Knife which has a wider design

- Plastic knife with the design of a throwing knife

- Cold Steel Covert Action Tanto (CAT) Featherweight copy of Cold Steel's Tanto - featuresa one-piece Zytel with Reinforced Point. Overall length is 11 1/4"

- United Cutlery Stealth Hairbrush Dagger - Shown without the cover.

- Cold Steel Delta Dart (CS92D) Features one piece Zytel with a an ultra sharp point with Triangular Blade with a knurled handle  Overall length is 8 1/8"

Above Images from Left to Right

- Throwing knife - made of stainless steel and come in a 3pak with a nylon pouch to hold them

- Throwing knife - the 3 pack is shown here side by side

- Cold Steel Flight Thrower (CS80FT) 1 piece high carbon Steel construction with cord-wrapped handle Overall Length is 10 3/4"

- 4-point Ninja Stinger throwing Star 4" wide - Comes with a nylon pouch

- Cold Steel - Double edge throwing knife, comes with a cordura sheath 

Above Images from Left to Right

- Automatic knife - features a 1 1/4 " knife - you slide a button to open and retract the blade, spring powered 

- Automatic knife - features a 1 1/2 " knife - you slide a button to open and retract the blade, spring powered 

- Automatic knife - features a 1 1/2 " knife - you push a button to open the blade, spring powered 

- Small 1 1/2 blade with a brass handle with a skull. serpent and women design 

AngCobra's Main Page -  Contains links to all of my webpages, Anime, Fanfics, etc.

Weapons Webpage -  Contains pictures and information about misc. weapons, replaces my Firearms webpage

Pistols Webpage -  Contains pictures and information about Pistols.

Rifles Webpage -  Contains pictures and information about Rifles.

Edge Weapons Webpage -  Contains pictures and information about Knives and Swords.

Impact Weapons Webpage -  Contains pictures and information about Batons and Staff.

Weapons Links Webpage -  Contains weapon related links

Firearms Webpage -  Contains Links to all of my new pages, will no longer be updated.

Submit your website to 40 search engines for FREE!

To send an email to the webmaster of this page, Please click